Super Systems PC Configurator 2 - Manual (Page 97)

Super Systems Inc. Page 97 of 201 Configurator Manual #4562 Rev D
Configurator - Furnace Name menu option
Alarm Setup
The 9200 Dual Loop controller can be configured to use three different alarms. Each of the
alarms consists of an alarm setpoint, alarm type, alarm hysteresis, smart alarm, and ON delay
time. The alarms come from the factory with a default configuration dependent on the
application but also can be modified prior to shipment to your facility or in the field by a
supervisor.
Configurator – Alarm Setup menu option