Accton Technology ES4626 - Manual (Page 126)

126
2.10.3.3 FTP client configuration
Users should click “Switch basic configuration” and “FTP client service” to enter into this
configuration page.
Words and phrases are explained in the following:
Server IP address-IP address of the server
User name-the name of the user
Password-the specific password
Operation type-”Upload” means to upload files; “Download” means to download files
Transmission type-”ascii” means to transit files by using ASCII standard. “binary” means
the files are transmitted in binary standard.
Users should follow the Figure below to get the system file from the FTP Server 10.1.1.1,
with server file name is “nos.img” and local file name “nos.img.” The ftp username is
“switch” and password is “switch”. Click “Apply”.
2.10.3.4 FTP server configuration
Users should click “Switch basic configuration” and “FTP server service” to enter into
the configuration page and make configuration nodes, which include “server
configuration” and “user configuration.”
Words and phrases of “user configuration” are explained in the following:
z FTP Server state-status of the server. (“Open” or “Close”.)
z FTP Timeout-the timeout.
z User name-the name of the user.
z Password-the specific password.
z State-display the status of the password. “Plain text” means proclaimed display and
“encrypted” means “encrypted” display.
z Remove user-to remove a user.
z Add user-to add a user.