Accton Technology ES4626 - Manual (Page 40)

40
Default: The default setting is English display.
Usage Guide:
ES4624-SFP/ES4626-SFP switch provides help information in two
languages, the user can select the language according to their preference. After the
system restart, the help information display will revert to English.
2.1.1.17 login local
Command：login local
no login
Function： Login enables local user name and password identification, no login cancels
login local configuration.
Command Mode： Global Mode
Default： System Default is no login.
Usage Guide：
The command enable the user access in common mode of shell, types in
user name and password configured by username command, and then can access in
common user mode through level configured by the command. No login cancels login
local configuration.
Notice： Executing the command, it insures that priority of one user is 15, if it uses
username command configuration to login. Only this can ensure that the user accesses
from common mode to admin mode and modify system configuration after the user pass
the shell login identification. If there is no user of priority 15, the user can not access in
admin and global mode.
Example： Enable local use password identification
Switch(Config)#login local
2.1.1.18 password
Command: password <password>
no password
Function: Configure the password used for enter normal user mode on the console. The
“no password” command deletes this password
Parameter:
password is the configured code. Encryption will be performed by entering 8
Command mode: Global mode
Default: This password is empty by system default
Usage guide: When both this password and login command are configured, users have
to enter the password set by password command to enter normal user mode on console
Example: Switch(Config)#password 8 test
Switch(Config)#login
2.1.1.19 ping