Accton Technology ES4626 - Manual (Page 649)

649
ip dvmrp reject-non-pruners
no ip dvmrp reject-non-pruners
Configure the interface rejects to set up
neighbor relationship with non
pruning/grafting DVMRP router. The “no ip
dvmrp reject-non-pruners ” command
restores to being able to set up neighbor ship.
（4. Configure DVMRP Tunnel
Command Explanation
Interface Configuration Mode
ip dvmrp tunnel <index>
<src-ip> <dst-ip>
no ip dvmrp tunnel {<index>
|<src-ip> <dst-ip>}
This command configures a DVMRP tunnel;
the “no ip dvmrp tunnel {<index> |<src-ip>
<dst-ip>} ” command deletes a DVMRP
tunnel.
16.4.3 Commands for DVMRP
16.4.3.1 ip dvmrp
Command: ip dvmrp
no ip dvmrp
Function: Configure to enable DVMRP protocol on interface; the “no ip dvmrp”
command disenables DVMRP protocol.
Parameter: None
Default:
Disable DVMRP Protocol
Command Mode: Interface Configuration Mode
Usage Guide: The interface processes DVMRP protocol messages, only executing
DVMRP protocol on interface.
Example: Enable DVMRP Protocol on interface vlan1.
Switch (Config)#interface vlan 1
Switch(Config-If-vlan1)#ip dvmrp
16.4.3.2 ip dvmrp metric
Command: ip dvmrp metric <metric_val>
no ip dvmrp metric
Function: Configure interface DVMRP report message metric value; the “no ip dvmrp
metric ” command restores default value.
Parameter: <metric_val> is metric value, value range from 1 to 31
Default: 1