9 ipv6 mld join-group mode source, 10 ipv6 mld limit – Accton Technology ES4626 User Manual

Page 722

Advertising
background image

722

Usage Guide:

The address range of the IPv6 multicast is FFxy::/8, however the

(FF02::/16) is permanent addresses which can not be joined in.

Example:

Join the interface vlan2 in multicast group with multicast address of ff1e::1:3.

Switch(Config)#interface vlan 2

Switch(Config-if-Vlan2)#ipv6 mld join-group ff1e::1:3

17.3.3.9 ipv6 mld join-group mode source

Command: ipv6 mld join-group <X:X::X:X> mode <include|exclude> source

<.X:X::X:X>

no ipv6 mld join-group <X:X::X:X> source <.X:X::X:X>

Function:

Configure the sources of certain multicast group which the interface join in.

Note: because of the client group has got only INLCUDE and EXCLUDE modes, if the

source mode is not in accordance with current mode configured, the group mode will be

changed and the original sources of the other modes configured will be cleared

permanently; the “no” form of this command cancels joining certain group.

Parameter: <X:X::X:X>

is a valid IPv6 multicast address

<include|exclude>

joining mode

<.X:X::X:X>

source list, configure several sources is allowed.

Default:

No multicast group to be joined by factory default

Command Mode: Interface Mode

Usage Guide:

The address range of the IPv6 multicast is FFxy::/8, however the

(FF02::/16) is permanent addresses which can not be joined in. As for sources with mode

same as the original one, the source will be added, while for those with different modes,

the original sources will be cleared.

Example:

Join vlan2 in multicast group with multicast address of ff1e::1:3, with sources 2003::1 and

2003::2 in INCLUDE mode.

Switch(Config)#interface vlan 2

Switch(Config-if-Vlan2)#ipv6 mld join-group ff1e::1:3 mode include source 2003::1

2003::2

17.3.3.10 ipv6 mld limit

Command:ipv6 mld limit <state-count>

no ipv6 mld limit

Function:

Configure the MLD state count limit of the interface; the “no ipv6 mld limit

command restores the manually configured value to default value

Parameter:<state-count>

:max MLD state the interface maintains, the valid range is

1-5000.

Advertising
This manual is related to the following products: