Accton Technology ES4626 - Manual (Page 808)

808
access control method which is based on port.
z Port maximum user(1-254) - Configures the permission maximum user for specific
port.
Example: Choose Ethernet port1/1, choose 802.1x status as Open, choose
Authentication type as auto, choose Authentication mode as port based, configure Port
maximum user as 10 and then click the Set button to apply this configuration to switch.
19.6.2.3 802.1X port mac configuration
Click “Authentication configuration”, “802.1X configuration”, “802.1x port mac
configuration” to Add a MAC address table to dot1x address filter.
z Port -If specify port, the added list only suitable for specific port, specify All Ports,
the added list suitable for all port.
z Mac -adds MAC address
z Operation type -adds, removes filter MAC
Example: Choose Ethernet port 1/1, configure MAC as 00-11-11-11-11-11, choose
Operation type as Add mac filter entry, and then click the Apply button to apply this
configuration to switch.
19.6.2.4 802.1X port status list
Click “Authentication configuration”, “802.1X configuration”, and “802.1x port status
list” to display port 802.1x configuration information, and make re-authentication for the
specific port.
z Port -assign port
z 802.1x status -port 802.1x status