Accton Technology ES4626 - Manual (Page 589)

589
Network Next Hop Metric LocPrf Weight Path
* 100.1.1.0/24 10.1.1.64 0 0 500 100 600 ?
Total number of prefixes 1
13.8.5.1.13 show ip bgp regexp
Command: show ip bgp [<ADDRESS-FAMILY>] regexp [<LINE>]
Function: For displaying the BGP routes meets specific AS related normal expressions
Parameter: <ADDRESS-FAMILY> : >: address-family such as “ipv4 unicast”
<LINE> : Regular expression
Default: None
Command Mode: all modes
.
Usage Guide: We can select BGP route of the required AS with normal expression
Example:
Switch#sh ip bgp regexp 100
BGP table version is 2, local router ID is 11.1.1.100
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* 100.1.1.0/24 10.1.1.64 0 0 500 100 600 ?
Total number of prefixes 1
13.8.5.1.14 show ip bgp route-map
Command: show ip bgp [<ADDRESS-FAMILY>] route-map [<NAME>]
Function: For displaying the BGP routes meets the specific related route map
Parameter: <ADDRESS-FAMILY> : such as “ipv4 unicast”
<NAME> : Name of route map
Default: None
Command Mode:
All modes
Usage Guide: Configure the route map with the route-map command, through which it
can be displayed that process routes with route map. The command will display the
routes meet specific route map
Example:
Switch#sh ip bgp route-map rmp
BGP table version is 2, local router ID is 11.1.1.100
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete