7 mrpp enable, 8 mrpp ring, 9 node-mode – Accton Technology ES4626 User Manual
Page 830
830
Switch(Config)# mrpp ring 4000
Switch(mrpp-ring-4000)#hello-timer 3
21.3.7 mrpp enable
Command：mrpp enable
no mrpp enable
Function：
Enable MRPP protocol module, the “no mrpp enable” command disables
MRPP protocol.
Parameter：
Command Mode：
Global Mode
Default：
The system doesn’t enable MRPP protocol module
Usage Guide：
If it needs to configure MRPP ring, it enables MRPP protocol. Executing
“no mrpp enable” command, it ensures to disable the switch enabled MRPP ring.
Example：
Globally enable MRPP
Switch(Config)#mrpp enable
21.3.8 mrpp ring
Command：mrpp ring <INT>
no mrpp ring <INT>
Function：
Create MRPP ring, and access MRPP ring mode, the“no mrpp ring<INT>”
command deletes configured MRPP ring.
Parameter： <INT>
is MRPP ring ID, the valid range is from 1 to 4096
Command Mode：
Global Mode
Usage Guide：
If this MRPP ring doesn’t exist itcreate new MRPP ring when executing
the command, and then it enter MRPP ring mode. It needs to ensure disable this MRPP
ring when executing the “no mrpp ring” command.
Switch(Config)# mrpp ring 100
21.3.9 node-mode
Command： node-mode {maser|transit}
Function：
Configure the type of the node to primary node or secondary node.
Parameter：
Command Mode：
MRPP ring mode
Default：
Default the node mode is secondary node.
Usage Guide：
。
Example：
Configure the switch to primary node. MRPP ring 4000