Accton Technology ES4626 - Manual (Page 763)

763
Examples: Create a name expansion IP access-list whose name is ipFlow.
Switch(Config)# access-list ip standard ipFlow
18.2.2.13 ipv6 access-list
Command ： ipv6 access-list <num> {deny | permit} {<sIPv6Prefix/sPrefixlen> |
any-source | {host-source <sIPv6Addr>}}
no ipv6 access-list <num>
Functions： Creates a numbered standard IP access-list, if the access-list already exists,
then a rule will add to the current access-list; the “no access-list <num>“ command
deletes a numbered standard IP access-list.
Parameters：<num> is the list number ,list range is between 500～599;<sIPv6Prefix>is
prefix of the ipv6 source address,<sPrefixlen>is the length ofprefix of the ipv6 source
address, range is between 1～128.<sIPv6Addr> is ipv6 source address.
Command Mode: Global mode
Default: No access-list configured
Usage Guide:
Creates a numbered 520 standard IP access-list first time,the following
configuration will add to the current access-list.
Examples: Creates a numbered 520 standard IP access-list,allow the source package
from 2003:1:2:3::1/64 pass through the net,and deny all the other package from the
source address 2003:1:2::1/48 pass through
Switch (Config)#ipv6 access-list 520 permit 2003:1:2:3::1/64
Switch (Config)#ipv6 access-list 520 deny 2003:1:2:::1/48
18.2.2.14 ipv6 access standard
Command: ipv6 access-list standard <name>
no ipv6 access-list standard <name>
Function: Create a name-based standard IPv6 access list; the “no ipv6 access-list
standard<name> ”command deletes the name-based standard IPv6 access list
(including all entries).
Parameter:<name>
is the name for access list, the character string length is from 1 to
16.
Command Mode: Global Mode
Default: No access list is configured by default
Usage Guide: When this command is run for the first time, only an empty access list with
no entry will be created.
Example: Create a standard IPv6 access list named “ip6Flow”
Switch(Config)#ipv6 access-list standard ip6Flow
18.2.2.15 ipv6 access extended