Accton Technology ES4626 - Manual (Page 450)

450
Example:
Switch#config terminal
Switch(config)#router ospf 100
Switch(config-router)#auto-cost reference-bandwidth 50
13.6.3.10 capability opaque
Command: [no] capability opaque
Function: This command enables opaque-LSA. The “[no] capability opaque” command
closes this function.
Default: Opaque-LSAs enabled
Command Mode: OSPF protocol mode
Usage Guide: Opaque-LSAs is type 9,10,11 LSA which is used for transmitting
information’s for the externals.
Example:
Switch#config terminal
Switch(config)#router ospf 100
Switch(config-router)#no capability opaque
13.6.3.11 compatible rfc1583
Command: [no] compatible rfc1583
Function: This command configures to rfc1583 compatible. The “[no] compatible
rfc1583 ” command close the compatibility.
Default:
Rfc 2328 compatible by default
Command Mode: OSPF protocol mode
Example:
Switch#config terminal
Switch(config)#router ospf 100
Switch(config-router)#compatible rfc1583
13.6.3.12 clear ip ospf process
Command: clear ip ospf [<process-id>] process
Function: Use this command to clear and restart OSPF routing processes. One certain
OSPF process will be cleared by specifying the process ID, or else all OSPF processes
will be cleared.
Default: No default configuration
Command Mode: Admin mode
Example:
Switch#clear ip ospf process