Accton Technology ES4626 - Manual (Page 594)

594
SwitchB(config-router-af)#neighbor 2003::4 activate
SwitchB(config-router-af)#exit-address-family
SwitchB(config-router-bgp)#exit
SwitchB(config)#
SwitchC configuration as follows:
SwitchC(config)#router bgp 200
SwitchC(config-router-bgp)#neighbor 2002::2 remote-as 200
SwitchC(config-router-bgp)#neighbor 2003::4 remote-as 200
SwitchC(config-router-bgp)#address-family IPv6 unicast
SwitchC(config-router-af)#neighbor 2002::2 activate
SwitchC(config-router-af)#neighbor 2003::4 activate
SwitchC(config-router-af)#exit-address-family
SwitchC(config-router-bgp)#exit
SwitchD configuration as follows:
SwitchD(config)#router bgp 200
SwitchD(config-router-bgp)#neighbor 2003::3 remote-as 200
SwitchD(config-router-bgp)#neighbor 2002::2 remote-as 200
SwitchD(config-router-bgp)#address-family IPv6 unicast
SwitchD(config-router-af)#neighbor 2002::2 activate
SwitchD(config-router-af)#neighbor 2003::3 activate
SwitchD(config-router-af)#exit-address-family
SwitchD(config-router-bgp)#exit
Here the connection between SwitchB and SwitchA is EBGP, and the connection
between SwitchC and SwitchD is IBGP. The BGP connection can be processed between
SwitchB and SwitchD without physical link, but the premise is a route which reaches from
one switch to the other switch. The route can be obtained by static routing or IGP.
13.9.4 MBGP4+ Troubleshooting
It is the same as corresponding section of BGP