Accton Technology ES4626 - Manual (Page 167)

167
z Saving network resources
z Simplifying Network Management
z Lowering network cost
z Enhancing network security
VLAN and GVRP (GARP VLAN Registration Protocol) defined by 802.1Q are
implemented in ES4624-SFP/ES4626-SFP switch. The chapter will describe the use and
configuration of VLAN and GVRP in details.
5.1.2 VLAN Configuration Task List
1. Creating or deleting VLAN
2. Assigning Switch ports for VLAN
3. Set The Switch Port Type
4. Set Trunk port
5. Set Access port
6. Enable/Disable VLAN ingress rules on ports
7. Configure Private VLAN
8. Set Private VLAN association
1. Creating or deleting VLAN
2. Assigning Switch ports for VLAN
3. Set The Switch Port Type
4. Set Trunk port
Command Explanation
Global Mode
vlan <vlan-id> [name
<vlan-name>]
no vlan <vlan-id>[name]
Create/delete VLAN or enter VLAN Mode and
Set or delete VLAN name
Command Explanation
VLAN Mode
switchport interface <interface-list>
no switchport interface <interface-list>
Assign Switch ports to VLAN
Command Explanation
Interface Mode
switchport mode {trunk|access}
Set the current port as Trunk or Access port.