Accton Technology ES4626 User Manual
Page 625
625
ip pim bsr-candidate {vlan
<vlan-id>|
<ifname>}[ <mask-length>][ <prio
rity> ]
no ip pim bsr-candidate
This command is the global candidate BSR
configuration command, which is used to
configure the information of PIM-SM
candidate BSR so that it can compete for
BSR router with other candidate BSRs. The
“no ip pim bsr-candidate” command cancels
the configuration of BSR.
2)
Configure switch to be candidate RP
Command Explanation
Global Mode
ip pim rp-candidate { vlan <
vlan-id >| <ifname>}
[<A.B.C.D/M>][<priority>]
(no) ip pim rp-candidate
This command is the global candidate RP
configuration command, which is used to
configure the information of PIM-SM
candidate RP so that it can compete for RP
router with other candidate RPs. The “no ip
pim rp-candidate
” command cancels the
configuration of RP.
3)
Configure Static RP
Command Explanation
Global Mode
ip pim rp-address <A.B.C.D>
[<A.B.C.D/M>]
no ip pim rp-address <A.B.C.D>
{<all>|<A.B.C.D/M>}
This command is the global candidate RP
configuration command, which is used to
configure the information of PIM-SM
candidate RP so that it can compete for RP
router with other candidate RPs. The “no ip
pim rp-address <A.B.C.D>
{<all>|<A.B.C.D/M>}
” command cancels the
configuration of RP.
3Disable PIM-SM Protocol
Command Explanation
Interface Configuration Mode
no ip pim sparse-mode | no ip
pim multicast-routing
no ip pim sparse-mode | no ip
pim multicast-routing (Global
Mode)
Disable PIM-SM Protocol.