Accton Technology ES4626 - Manual (Page 150)

150
applied to port 1/1.
Port list table displays the related information of the switch physical ports.
3.6.3 Bandwidth control
Click port configuration, Ethernet port configuration, Bandwidth control and proceed to do
port bandwidth control. 1
z Port: Specifies configuration port
z Bandwidth control level: port bandwidth control. The unit is Mbps and the value range
is 1~10000Mbps
z Control type: Ingress means to control port bandwidth when receiving data packet
sent from outside the switch. Egress means to control port bandwidth when sending
data packets to outside of the switch. Ingress and Egress means to control port
bandwidth when both receiving and sending.
Example: Choose Port to be Ethernet 1/1, set up Bandwidth control level as 100Mb,
Control type as Ingress, then click Apply button. So the port 1/1 will execute bandwidth
control and receiving data packet with 100M.
3.6.4 Vlan interface configuration