Accton Technology ES4626 - Manual (Page 521)

521
no neighbor {<ip-address> | <TAG>}
remote-as <as-id>
{<ip-address> | <TAG>}
remote-as <as-id> command
deletes the neighbor.
neighbor { <ip-address> | <TAG> } description
<.LINE>
no neighbor { <ip-address> | <TAG> }
description
Associate a description with a
neighbor; the no neighbor
{ <ip-address> | <TAG> }
description command deletes
this description.
neighbor { <ip-address> | <TAG> }
default-originate [route-map <NAME>]
no neighbor { <ip-address> | <TAG> }
default-originate [route-map <NAME>]
Permit to send the default route
0.0.0.0; the no neighbor
{ <ip-address> | <TAG> }
default-originate [route-map
<NAME>] command cancels
sending default route.
neighbor { <ip-address> | <TAG> }
send-community
no neighbor { <ip-address> | <TAG> }
send-community
Configure the community
attributes sent to the neighbor .
neighbor { <ip-address> | <TAG> } timers
<keep alive> <holdtime>
no neighbor { <ip-address> | <TAG> } timers
Configure a particular neighbor’s
keep-alive and hold-time timer;
the no neighbor { <ip-address>
| <TAG> } timers command
recovers the default value.
neighbor {<ip-address> | <TAG>}
advertisement-interval <seconds>
no neighbor {<ip-address> | <TAG>}
advertisement-interval
Configure the min interval of
sending BGP routing information;
the no neighbor {<ip-address> |
<TAG>} advertisement-interval
command recovers the default
value.
neighbor {<ip-address> | <TAG>}
ebgp-multihop [<1-255>]
no neighbor {<ip-address> | <TAG>}
ebgp-multihop
Configure the allowance of EBGP
connections with networks
connected indirectly; the no
neighbor {<ip-address> |
<TAG>} ebgp-multihop
command cancels this setting.
neighbor { <ip-address> | <TAG> } weight
<weight>
no neighbor { <ip-address> | <TAG> } weight
Configure BGP neighbor weights;
the no neighbor { <ip-address>
| <TAG> } weight command