Accton Technology ES4626 - Manual (Page 152)

152
Click Port configuration, Port mirroring configuration, Mirror configuration to configure
port mirroring function including configuring mirroring source port and mirroring
destination port functions.
Configure mirroring source port:
z Session: Mirror dialog value
z source interface list
z Mirror direction: rx means to mirror the port receiving data packets; tx means to mirror
the port sending data packets; both means to mirror both receiving & sending
Example: Select mirror dialog session as one, set up source interface list as Ethernet
ports 1/1~4 and the mirroring direction as rx. Click Apply button and this port will be
added into the monitor session. Click the Default button to delete this port from the list.
Configure mirroring destination port. 2.
z Session: Mirroring dialog value
z destination interface
z tag: Setting the vlan tag function means all mirroring packets carry vlan tags;
preserve means that if the Ingress mirroring packet, carrying a vlan tag, while
Ingress, then Egress mirroring packet will carry vlan tag as well. Otherwise will be
not.
Select mirror dialog session as 1 and set up port mirroring list as 1/5, tag as preserve.
Click Apply button and this setting will be applied in the switch.
3.6.9 Port debug and maintenance
Click Port configuration, Port debug and maintenance and open the Port debug and
maintenance management list to get port information.
3.6.10 Show port information
Click “Port configuration”, “Port debug” and “maintenance”, Show port information to
check the statistic information of the receiving/sending data packet information of the
port.