Accton Technology ES4626 - Manual (Page 467)

467
SwitchB(config-if-vlan3)#no shut-down
SwitchB(config-if-vlan3)#exit
Enable OSPF protocol, configure the OSPF area interfaces vlan1 and vlan3 in
SwitchB(config)#router ospf
SwitchB(config-router)# network 10.1.1.0/24 area 0
SwitchB(config-router)# network 20.1.1.0/24 area 1
SwitchB(config-router)#exit
SwitchB(config)#exit
SwitchB#
Layer 3 SwitchC
Configuration of the IP address for interface vlan3
SwitchC#config
SwitchC(config)# interface vlan 3
SwitchC(config-if-vlan1)# ip address 20.1.1.2 255.255.255.0
SwitchC(config-if-vlan3)#no shut-down
SwitchC(config-if-vlan3)#exit
Enable OSPF protocol, configure the OSPF area interfaces vlan3 resides in.
Initiate the OSPF protocol, configure the OSPF area to which interface vlan3
belongs
SwitchC(config)#router ospf
SwitchC(config-router)# network 20.1.1.0/24 area 1
SwitchC(config-router)#exit
SwitchC(config)#exit
SwitchC#
Layer 3 SwitchD
Configuration of the IP address for interface vlan3
SwitchD#config
SwitchD(config)# interface vlan 3
SwitchD(config-if-vlan3)# ip address30.1.1.2 255.255.255.0
SwitchD(config-if-vlan3)#no shut-down
SwitchD(config-if-vlan3)#exit
Enable OSPF protocol, configure the OSPF area interfaces vlan3 resides in.
SwitchD(config)#router ospf
SwitchD(config-router)# network 30.1.1.0/24 area 0
SwitchD(config-router)#exit
SwitchD(config)#exit
Layer 3 SwitchE
Configuration of the IP address for interface vlan2