Accton Technology ES4626 - Manual (Page 505)

505
13.7.5.1.6 debug ipv6 ospf route
Command: [no]debug ipv6 ospf route [ase|ia|install|spf]
Function: Open debugging switches showing OSPF related routes; the “[no]debug
ipv6 ospf route [ase|ia|install|spf]” command closes this debugging switch
Default: Closed
Command Mode:
Admin mode and global mode
13.7.5.1.7 show ipv6 ospf
Command: show ipv6 ospf [<tag>]
Function: Display OSPF global and area messages
Parameter: <tag> is the process tag which is a character string
Default: Not displayed
Command Mode: All modes
Example:
Routing Process "OSPFv3 (*null*)" with ID 192.168.2.2
SPF schedule delay 5 secs, Hold time between SPFs 10 secs
Minimum LSA interval 5 secs, Minimum LSA arrival 1 secs
Number of external LSA 0. Checksum Sum 0x0000
Number of AS-Scoped Unknown LSA 0
Number of LSA originated 6
Number of LSA received 14
Number of areas in this router is 1
Area BACKBONE(0)
Number of interfaces in this area is 2
SPF algorithm executed 6 times
Number of LSA 8. Checksum Sum 0x43D52
Number of Unknown LSA 0
13.7.5.1.8 show ipv6 ospf database
Command: show ipv6 ospf [<tag>] database
[ router [adv-router <advertiser_router>]
|network [adv-router <advertiser_router>]
| intra-prefix [adv-router <advertiser_router>]
| link [adv-router <advertiser_router>]
| external [adv-router <advertiser_router>]
| inter-prefix [adv-router <advertiser_router>]
| inter-router [adv-router <advertiser_router>]]
Function: Display the OSPF link state data base message
Parameter: <tag> is the process tag which is a character string