Accton Technology ES4626 - Manual (Page 641)

641
Usage Guide: Enable the specified timer’s debug information.
Example:
Switch# debug ip pim timer assert
16.3.5.1.9 show ip pim bsr-router
Command: show ip pim bsr-router
Function: Display BSR address
Parameter: None
Default: None
Command Mode: Admin Mode and Global Mode
Usage Guide:
Display the BSR information maintained by the PIM.
Example: show ip pim bsr-router
PIMv2 Bootstrap information
This system is the Bootstrap Router (BSR)
BSR address: 10.1.4.3 (?)
Uptime: 00:06:07, BSR Priority: 0, Hash mask length: 10
Next bootstrap message in 00:00:00
Role: Candidate BSR
State: Elected BSR
Next Cand_RP_advertisement in 00:00:58
RP: 10.1.4.3(Vlan1)
Displayed Information Explanations
BSR address Bsr-router Address
Priority Bsr-router Priority
Hash mask length Bsr-router hash mask length
State The current state of this candidate BSR,
Elected BSR is selected BSR
16.3.5.1.10 show ip pim interface
Command: show ip pim interface
Function: Display PIM interface information
Parameter: None
Default:
None
Command Mode: Admin Mode and Global Mode
Usage Guide: Display PIM interface information
Example: testS2(config)#show ip pim interface
Address Interface VIFindex Ver/ Nbr DR DR
Mode Count Prior