Accton Technology ES4626 - Manual (Page 524)

524
bgp default local-preference <value>
no bgp default local-preference
Change default local preference; the no
bgp default local-preference command
recovers the default value.
11． Enable sending default route
Command Explanation
BGP configuration mode
neighbor { <ip-address> | <TAG> }
default-originate
no neighbor { <ip-address> | <TAG> }
default-originate
Permit sending default route
0.0.0.0; the no neighbor
{ <ip-address> | <TAG> }
default-originate command
cancels sending default route.
12． Configure BGP’s MED Value
（1） Configure MED value
Command Explanation
Route map configuration command
set metric <metric-value>
no set metric
Configure metric value; the no set metric
command recovers the default value.
（2） Apply route selection based on MED according to the path from different
AS
Command Explanation
BGP configuration mode
bgp always-compare-med
no bgp always-compare-med
Permit the MED comparison from different
AS; the no bgp always-compare-med
commands forbids the comparison.
13． Configure BGP routing redistribution
Command Explanation
BGP configuration mode
redistribute { connected | static | rip |
ospf} [metric <metric>] [route-map
<NAME>]
no redistribute { connected | static |
rip | ospf}
Redistribute IGP routes to BGP and may
specify the redistributed metric and route
reflector; the no redistribute
{ connected | static | rip | ospf}
command cancels the redistribution.
14． Configure Route Dampening