Accton Technology ES4626 - Manual (Page 453)

453
cancels the authentication
Parameter: <ip-address> is the interface IP address, shown in dotted decimal
notation.
message-digest: Use MD5 authentication
null: no authentication applied, which resets the password or MD5 authentication applied
on the interface.
Default: Authentication not required in receiving OSPF packets on the interface
Command Mode: Interface Mode
Example:
Switch#config terminal
Switch(config)#interface vlan 1
Switch(Config-if-Vlan1)#ip ospf authentication message-digest
13.6.3.17 ip ospf authentication-key
Command: ip ospf [<ip-address>] authentication-key <LINE>
no ip ospf [<ip-address>] authentication
Function: Specify the authentication key required in sending and receiving OSPF packet
on the interface; the “no ip ospf [<ip-address>] authentication” cancels the
authentication key.
Parameter: <ip-address> is the interface IP address shown in dotted decimal
notation; <LINE> specifies the key required in the plaintext authentication.
Default: Authentication not required in receiving OSPF packets on the interface
Command Mode:
Interface Mode
Example:
Switch#config terminal
Switch(config)#interface vlan 1
Switch(Config-if-Vlan1)#ip ospf authentication-key password
13.6.3.18 ip ospf cost
Command: ip ospf [<ip-address>] cost
<cost>
no ip ospf [<ip-address>] cost
Function: Specify the cost required in running OSPF protocol on the interface; the “no ip
ospf [<ip-address>] cost ” command restores the default value.
Parameter: <ip-address> is the interface IP address shown in dotted decimal notation;
<cost > is the cost of OSPF protocol ranging between 1~65535
Default: Default OSPF cost on the interface is 10.
Command Mode:
Interface Mode
Example: