Accton Technology ES4626 - Manual (Page 97)

97
client functions. TFTP server is not started by default.
Example:
enable TFTP server service.
Switch#config
Switch(Config)#tftp-server enable
2.5.3.2.2.9 tftp-server retransmission-number
Command: tftp-server retransmission-number <number>
Function: Set the retransmission time for TFTP server
Parameter: < number>
is the time to re-transfer, the valid range is 1 to 20.
Default: The default value is 5 retransmission.
Command mode: Global Mode
Example: Modify the retransmission to 10 times.
Switch#config
Switch(Config)#tftp-server retransmission-number 10
2.5.3.2.2.10 tftp-server transmission-timeout
Command: tftp-server transmission-timeout <seconds>
Function: Set the transmission timeout value for TFTP server
Parameter: < seconds> is the timeout value, the valid range is 5 to 3600s.
Default: The system default timeout setting is 600 seconds.
Command mode: Global Mode
Example: Modify the timeout value to 60 seconds.
Switch#config
Switch(Config)#tftp-server transmission-timeout 60
2.5.4 FTP/TFTP Configuration Examples
Fig 2-4 Download nos.img file as FTP/TFTP client
Scenario 1:
The switch is used as FTP/TFTP client. The switch connects from one
computer
10.1.1.1
Switch
10.1.1.2