Accton Technology ES4626 - Manual (Page 708)

708
Parameter: None
Default:
Disabled
Command Mode: Admin Mode and Global Mode
Usage Guide: Enable pim mfc debug switch and display generated and transmitted
multicast id’s information.
Example: Switch# debug ipv6 pim mfc in
17.2.5.1.3 debug ipv6 pim mib
Command: debug ipv6 pim mib
no ipv6 debug pim mib
Function:
Enable or Disable PIM MIB debug switch
Parameter: None
Default: Disabled
Command Mode: Admin Mode and Global Mode
Usage Guide: Inspect PIM MIB information by PIM MIB debug switch. It’s not available
now and it’s for the future extension.
Example: Switch# debug ipv6 pim mib
17.2.5.1.4 debug ipv6 pim nexthop
Command: debug ipv6 pim nexthop
no debug ipv6 pim nexthop
Function: Enable or Disable pim nexthop debug switch
Parameter: None
Default: Disabled
Command Mode: Admin Mode and Global Mode
Usage Guide: Inspect PIM NEXTHOP changing information by the pim nexthop switch.
Example: Switch# debug ipv6 pim nexthop
17.2.5.1.5 debug ipv6 pim nsm
Command: debug ipv6 pim nsm
no debug ipv6 pim nsm
Function: Enable or Disable pim debug switch communicating with Network Services
Parameter: None
Default: Disabled
Command Mode: Admin Mode and Global Mode
Usage Guide: Inspect the communicating information between pim and Network
Services by this switch.
Example:
Switch# debug ipv6 pim nsm