Accton Technology ES4626 - Manual (Page 556)

556
Default: No neighbors
Command Mode:
BGP mode and address-family mode
Usage Guide: The BGP neighbors are completely generated through command
configurations. A neighbor relationship can only be really established by mutual
configuring. Partner AS number should be specified in configuration. The neighbor
relationship can not be established when the AS number is incorrect. The partner AS
number is the same with that of local side inside the AS
Example:
Switch(config)#router bgp 200
Switch(config-router)# neighbor 10.1.1.64 remote-as 100
13.8.3.66 neighbor remove-private-AS
Command: neighbor {<ip-address>|<TAG>} remove-private-AS
no neighbor {<ip-address>|<TAG>} remove-private-AS
Function: Configures whether remove the private AS number when sending to the
neighbor.The “no neighbor {<ip-address>|<TAG>} remove-private-AS” command
cancels this configuration.
Parameter: <ip-address> : Neighbor IP address
<TAG> : Name of peer group
Default: Not configured
Command Mode: BGP mode and address-family mode.
Usage Guide: Configure this attribute to avoid assigning the internal AS number to the
external AS sometimes. The internal AS number ranges between 64512-65535, which
the AS number could not be sent to the INTERNET since it is not a valid external AS
number. What removed here is private AS numbers of the totally private AS routes. Those
who have private AS numbers while also have public AS numbers are not processed.
Example:
Switch(config-router)#neighbor 10.1.1.64 remove-private-AS
13.8.3.67 neighbor route-map
Command: neighbor {<ip-address>|<TAG>} route-map <NAME> {<in|out>}
no neighbor {<ip-address>|<TAG>} route-map <NAME> {<in|out>}
Function: Configure the route mapping policy when sending or receiving route. the “no
neighbor {<ip-address>|<TAG>} route-map <NAME> {<in|out>} ” command cancels
this configuration
Parameter: <ip-address> : Neighbor IP address
<TAG> : Name of peer group
<NAME>: Name of route mapping