Accton Technology ES4626 - Manual (Page 561)

561
{<ip-address>|<TAG>} timers <0-65535> <0-65535> “ command restores the defaults
Parameter:
Neighbor IP address
<TAG> : Name of peer group
<0-65535> : Respectively the KEEPALIVE and HOLD TIME
Default: Default KEEPALIVE time is 60s, while HOLD TIME is 240s
Command Mode: BGP mode and address-family mode
Usage Guide: Send KEEPALIVE interval and HOLD TIME intervals sent in the peer
connection. The hold time is the time period for maintain the connection when no
message is received from the partner (such as KEEPALIVE). And the connection will be
closed after this hold time.
Example:
Switch(config-router)#neighbor 10.1.1.64 timers 50 200
Relevant Commands: neighbor timers connect, timers bgp, no timers bgp
13.8.3.76 neighbor timers connect
Command: neighbor {<ip-address>|<TAG>} timers connect <0-65535>
no neighbor {<ip-address>|<TAG>} timers connect [<0-65535>]
Function: Configure the connecting retry time interval. The “no neighbor
{<ip-address>|<TAG>} timers connect [<0-65535>] ” command restores the default
value
Parameter: <ip-address> : Neighbor IP address
<TAG> : Name of peer group
<0-65535>
: Retry interval
Default: 120s.
Command Mode: BGP mode and address-family mode
Usage Guide: Configure the connecting time interval when connecting a peer. The NO
form restores the default value.
Example:
Switch(config-router)#neighbor 10.1.1.64 timers connect 100
13.8.3.77 neighbor unsuppress-map
Command: neighbor {<ip-address>|<TAG>} unsuppress-map <WORD>
no neighbor {<ip-address>|<TAG>} unsuppress-map <WORD>
Function: Configure or cancel the unsurprising to conditions meet the specified route
map. The “no neighbor {<ip-address>|<TAG>} unsuppress-map <WORD>“ command
cancels this configuration
Parameter: <ip-address>
: Neighbor IP address
<TAG>
: Name of peer group