Accton Technology ES4626 - Manual (Page 741)

741
18.1.3 Access-list Action and Global Default Action
There are two access-list actions and default actions: “permit” or “deny”
The following rules apply:
z An access-list can consist of several rules. Filtering of packets compares packet
conditions to the rules, from the first rule to the first matched rule; the rest of the
rules will not be processed.
z Global default action applies only to IP packets in the incoming direction on the ports.
For non- incoming IP packets and all outgoing packets, the default forward action is
“permit”.
z Global default action applies only when packet flirter is enabled on a port and no
ACL is bound to that port, or no binding ACL matches.
z When an access-list is bound to the outgoing direction of a port, the action in the rule
can only be “deny”.
18.2 ACL Configuration
18.2.1 ACL Configuration Task Sequence
1. Configuring access-list
（ 1） Configuring a numbered standard IP access-list
（ 2） Configuring a numbered extended IP access-list
（ 3） Configuring a standard IP access-list based on nomenclature
a) Create a standard IP access-list based on nomenclature
b) Specify multiple “permit” or “deny” rule entries.
c) Exit ACL Configuration Mode
（ 4） Configuring an extended IP access-list based on nomenclature.
a) Create an extensive IP access-list based on nomenclature
b) Specify multiple “permit” or “deny” rule entries.
c) Exit ACL Configuration Mode
（ 5） Configuring a numbered standard MAC access-list
（ 6） Configuring a numbered extended MAC access-list
（ 7） Configuring a standard MAC access-list based on nomenclature
a) Create a standard IP access-list based on nomenclature
b) Specify multiple “permit” or “deny” rule entries.
c) Exit ACL Configuration Mode
（ 8） Configuring a numbered extended MAC-IP access-list
（ 9） Configuring a standard MAC-IP access-list based on nomenclature