Accton Technology ES4626 - Manual (Page 654)

654
route[report-timer|flash-upd-timer|route-expirytimer|
route-holdown-timer|route-burst-timer]]
|packet[[probe [in|out] | report [in|out | prune [in|out] raft [in|out] | graft-ack
[in|out] |in|out]]|
all] ” command disenables this debugging switch.
Parameter: None
Default: Disabled
Command Mode: Admin Mode
Usage Guide:
Enable this switch, and display DVMRP protocol executed relevant
messages.
16.4.5.1.2 show ip dvmrp
Command: show ip dvmrp
Function: Display DVMRP protocol information.
Parameter: None
Default: Do not display (Off)
Command Mode: Any Configuration Mode
Usage Guide: The command applies to display some total statistic information of
DVMRP protocol
Example:
Switch#show ip dvmrp
DVMRP Daemon Start Time: MON JAN 01 00:00:09 2001
DVMRP Daemon Uptime: 17:37:03
DVMRP Number of Route Entries: 2
DVMRP Number of Reachable Route Entries: 2
DVMRP Number of Prune Entries: 1
DVMRP Route Report Timer: Running
DVMRP Route Report Timer Last Update: 00:00:56
DVMRP Route Report Timer Next Update: 00:00:04
DVMRP Flash Route Update Timer: Not Running
16.4.5.1.3 show ip dvmrp interface
Command: show ip dvmrp interface [<ifname>]
Function: Display DVMRP interface
Parameter: <ifname> is interface name, namely displaying configured interface
information of specified interface.
Default: Do not display (Off)
Command Mode: Any Configuration Mode
Example: