Wiring of the standard device – Lenze EVS9332xK User Manual
Page 119
Advertising
Wiring of the standard device
Standard devices in the power range 15 ... 30 kW
Motor connection
5.5
5.5.6
l
5.5−11
EDSVS9332K EN 8.0−07/2013
PE
T1
T2
U
V
W
2
3
}
+
PE
0
1
U, V, W,
PE
5 Nm
44 lb-in
M 6
9300vec123
Fig. 5.5−7
Motor connection with KTY thermal sensor
0 Motor cable
1 Shield connection
Clamp the motor cable shield with the straps. If required, fix by means of
cable tie.
2 PE stud
PE cable connection with ring cable lug
3 U, V, W
Motor cable connection
Check the correct polarity. Observe maximum length of the motor cable.
Max. connectable cable cross−section: 50 mm
2
with ring cable lug
Advertising
This manual is related to the following products: