Lenze EVS9332xK - Manual (Page 41)

Technical data
Open and closed loop control
3
3.2
l
3.2−1 EDSVS9332K EN 8.0−07/2013
3.2 Open and closed loop control
Open and closed loopcontrol
Switching frequency 8 kHz or 16 kHz
Digital setpoint
selection
Accuracy ± 0.005 Hz (= ± 100 ppm)
Analog setpoint
selection
Linearity ± 0.15 % Signal level: 5 V or 10 V
Temperature
sensitivity ± 0.1 % 0 ... 50 °C
Offset ± 0.1 %
Analog inputs
Analog outputs l 2 inputs (bipolar)
l 2 outputs (bipolar)
Digital inputs
Digital outputs l 5 inputs (freely assignable)
l 1 input for controller inhibit
l 4 outputs (freely assignable)
l 1 resolver input; design: 9−pole Sub−D socket
l 1 incremental encoder input (500 kHz, TTL level); design: 9−pole Sub−D socket (pin)
l 1 digital frequency input (500 kHz, TTL level); design: 9−pole Sub−D socket (pin); can be optionally
used as incremental encoder input (500 kHz, TTL level)
l 1 digital frequency output (500 kHz, TTL level); design: 9−pole Sub−D socket
Cycle times
Digital inputs 1 ms
Digital outputs 1 ms
Analog inputs 1 ms
Analog outputs 1 ms (smoothing time: t= 2 ms)