Lenze EVS9332xK - Manual (Page 345)

Configuration
Code table
8
8.4
l
8.4−71 EDSVS9332K EN 8.0−07/2013
IMPORTANT Possible settings Code
Selection Lenze Designation No.
C1444
s
® Selection list 3 WELD1
Configuration of input signals
1 WELD1−XIN 1000 FIXED0INC Input X position
2 WELD1−LEN−O 1000 FIXED0INC Length of the closing phase
3 WELD1−LEN−C 1000 FIXED0INC Length of the opening phase
4 WELD1−LEN 1000 FIXED0INC Length of the profile
5 WELD1−TIME 1000 FIXED0INC Welding time in ms (1 inc. = 1 ms)
C1445 g {1 inc.} WELD1
Display of input signals
1 (C1444/1)
... ...
5 (C1444/5)
C1446 0 WELD1
0 Weld1 mode: Time The value at input Weld−Time" is interpreted
as time.
1 Weld1 mode: Distance The value at input Weld−Time" is interpreted
as distance.
2 Weld1 mode: Distance with saving The value at input Weld−Time" is interpreted
as distance. WELD−TIME" is saved for the
further cycle when phase 2 of the profile is
started.
C1448
s
CFG:
WELD1−BREAK 1000 FIXED0 ® Selection list 2 WELD1
Configuration of digital input signal
C1449 (C1448) g WELD1
Display of digital input signal
C1450
s
® Selection list 3 CONVPHPHD1, CONVPHPHD2
Configuration of input signals
1 CONVPHPHD1−
IN
1000 FIXED0INC
2 CONVPHPHD2−
IN
1000 FIXED0INC
C1451
g {1 inc.} CONVPHPHD1, CONVPHPHD2
Display of input signals
1 (C1450/1)
2 (C1450/2)
C1452 1 −32767 {1} 32767 CONVPHPHD1
Numerator
C1453 1 1 {1} 32767 CONVPHPHD1
Denominator
C1454
s
CONVPHPHD2−
RESET 1000 FIXED0 ® Selection list 2 CONVPHPHD2
Configuration of digital input signal
C1455 (C1454) g CONVPHPHD2
Display of digital input signal
C1456
s
CONV7−DFIN 1000 FIXEDPHI−0 ® Selection list 4 CONV7
Configuration of input signals
C1457 (C1456) g CONV7
Display of input signals
C1458 1 −32767 {1} 32767 CONV7
Numerator
C1459 1 1 {1} 32767 CONV7
Denominator
C1460 0 0
1 Analog setpoint
Digital frequency setpoint VMAS1
Setpoint source selection