Lenze EVS9332xK - Manual (Page 296)

Configuration
Code table
8
8.4
l
8.4−22 EDSVS9332K EN 8.0−07/2013
IMPORTANT Possible settings Code
Selection Lenze Designation No.
C0495
s
FEEDBACK N 0 Speed feedback system
Feedback system for the speed controller
0 Resolver at X7 The feedback system can be merged with the
settings of C0490 = 0, 1, 2, 3, 4.
l A setting of C0495 = 0 sets the rotor
displacement angle in C0058 to −90°
1 Encoder TTL at X8 The selection also sets C0490 to the same
value.
2 Sin/cos encoder at X8
3 Hiperface single−turn absolute value
encoder at X8
4 Hiperface multi−turn absolute value
encoder at X8
C0497 NACT−FILTER 2.0 0.0 {0.1 ms} 50.0 Nact filter time constant
Time constant for actual speed value
C0497 = 0 ms: Switched off
C0499 0 Mode of profile data access protection
0 Read/write protection
1 Only read protection
2 Only write protection
C0500 CAM CHECK
ACTUAL CURVE
0 CAM check of actual profile
0 No CAM check
1 CAM check of all data
2 CAM check, X axis only
3 CAM check, Y axis only
C0503 0 {1} 65535 Password
The allocation of passwords prevents
unauthorised access to profile data and
parameter set
1 0 PIN − profile data
2 0 Master PIN − profile data
C0506 g
1 Version
2 Data field length