Lenze EVS9332xK - Manual (Page 17)

Preface and general information
Legal regulations
1
1.2
l
1.2−1 EDSVS9332K EN 8.0−07/2013
1.2 Legal regulations
Lenze controllers are unambiguously identified by the contents of the
nameplate.
Lenze Automation GmbH, Hans−Lenze−Str. 1, D−31855 Aerzen, Germany
In conformity with EC "Low Voltage" Directive
9300 servo controllers and accessories
ƒ may only be operated under the conditions specified in this System
Manual.
ƒ are components
– for open and closed loop control of variable speed drives with PM
synchronous motors, asynchronous standard motors or asynchronous
servo motors.
– for installation in a machine.
– for assembly with other components to form a machine.
ƒ comply with the protection requirements of the EC "Low Voltage"
Directive.
ƒ are not machines for the purpose of the EC "Machinery" Directive.
ƒ are not to be used as domestic appliances, but only for industrial
purposes.
Drive systems with 9300 servo controllers
ƒ comply with the EC "Electromagnetic Compatibility" Directive if they
are installed according to the guidelines of CE−typical drive systems.
ƒ can be used
– for operation on public and non−public mains supplies.
– for operation in industrial premises and residential and commercial
areas.
ƒ The user is responsible for the compliance of the machine application
with the EC Directives.
Any other use shall be deemed inappropriate!
Identification
Manufacturer
CE conformity
Application as directed