Lenze EVS9332xK - Manual (Page 407)

Troubleshooting and fault elimination
Error messages during profile download
9
9.4
l
9.4−1 EDSVS9332K EN 8.0−07/2013
9.4 Error messages during profile download
During the profile download, the controller acknowledges a correctly
received message with ACK".
An error message is sent back to the sender (PLC/IPC). The content of the
error message depends on the communication profile used.
ƒ The "Error code sent" table assigns each fault message with a fault
name.
ƒ The "Cause of fault and fault elimination" table helps you to detect and
eliminate the possible fault cause by means of the fault name and the
code concerned.
Error code sent
Fault name 2102 2111/2113 2131/2133 2171/72 2175
LECOM INTERBUS DRIVECOM PROFIDRIVE CAN CANopen Device−
Net
E_SDF_... (Read L−C0068) Error class/code/Addcode class/code/Addcode Bytes 0/1/2/3
ILL_OPERATING_ACCESS 60
Read: 8/00/0020
Write: 8/00/0021 Write: 8/00/0021
Read: 8/00/FF08 Write: FE/08/0/0
Read: FF/08/0/0
1008 0306 0800 0000 Status: 08
INV_LENGTH_RANGE 50
Read: 8/00/0020
Write: 6/05/0012 Write: 6/05/0012
Read: 8/00/FF0B Write: FE/0B/0/0
Read: FF/0B/0/0
100B 0306 0504 0002 Status: 0B
INV_COLLISION_RANGE 50
Read: 8/00/0020
Write: 8/00/0040 Write: 8/00/0040
Read: 8/00/FF0C Write: FE/0C/0/0
Read: FF/0C/0/0
100C 0306 0800 0000 Status: 0C
INV_VALUE_RANGE 50
Read: 8/00/0020
Write: 8/00/0030 Write: 8/00/0030
Read: 8/00/FF0D Write: 2/0/0/0
Read: FF/0D/0/0
100D 0306 0609 0030 Status: 0D
INV_RANGE 50
Read: 8/00/0020
Write: 8/00/0030 Write: 8/00/0030
Read: 8/00/FF0E Write: 2/0/0/0
Read: FF/0E/0/0
100E 0306 0800 0000 Status: 0E
NOK F0
Read: 8/00/0020
Write: 8/00/0020 Write: 8/00/FEFF
Read: 8/00/FFFF Write: FE/FF/0/0
Read: FF/FF/0/0
10FF 0306 0800 0000 Status: FF