Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 136)

Editing Programs Online
Chapter 5
5-22
Figure 5.3
QuickPath Plus Menu Screen
CIRCLE, ANGLE, POINT ANGLE, CIRCLE, POINT
ANGLE, POINT CIRCLE , CIRCLE
CIR
ANG PT
CIR
CIR
ANG
CIR PT
ANG
PT
QUICKPATH PLUS MENU 1
3. After selecting the desired sample pattern enter values for the
parameters in the following way.
Use the up and down cursor keys to select the parameter to change or
enter. The selected item will be shown in reverse video.
Type in the desired data on the input line of the CRT and press the
[TRANSMIT] key. The data typed in will be entered as the data for
the selected parameter.
4. After all data for the pattern has been entered store the data by
pressing the {STORE} softkey.
STORE
(softkey level 6)
The control will generate the necessary block(s) to create the desired
axis moves. These blocks are displayed in the input area next to the
EDIT: prompt. These blocks may be edited in the input area as
discussed in chapter 2.