Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 232)

Displays and Graphics
Chapter 8
8-16
(10) {M CODE STATUS}
The currently active M codes are displayed. This screen indicates only the
last programmed M code in the modal group. It is the PAL programmer’s
responsibility to make sure proper machine action takes place when the
M code is programmed.
Figure 8.14
Result After Pressing {M CODE} Softkey
M05 SPINDLE STOP
M09 COOLANT OFF
M48 FEEDRATE OVERRIDE ENABLE
M CODE PRGRAM
D T G
ALL