Chapter 26 milling fixed cycles, Chapter 27 skip, gauge, and probing cycles – Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set User Manual

Page 14

Advertising
background image

9/Series PAL Reference Manual

Index (General)

9/Series Mill

Table of Contents

Operation and Programming Manual

x

25.1.2 Irregular Pocket Finishing (G89.2)

25-10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 26

Milling Fixed Cycles

26.0 Chapter Overview

26-1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26.1 Milling Fixed Cycles

26-2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26.2 Positioning and Hole Machining Axes

26-4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26.3 Parameters

26-7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26.4 Milling Fixed Cycle Operations

26-8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G73): Deep Hole Peck Drilling Cycle with Dwell

26-9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G74): Left-Hand Tapping Cycle

26-10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G74.1): Left-Hand Solid-Tapping Cycle

26-12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G76): Boring Cycle, Spindle Shift

26-15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G80): Cancel or End Fixed Cycles

26-18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G81): Drilling Cycle, No Dwell/Rapid Out

26-18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G82): Drill Cycle, Dwell/Rapid Out

26-20

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G83): Deep Hole Drilling Cycle

26-21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G84): Right-Hand Tapping Cycle

26-23

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G84.1): Right-Hand Solid-Tapping Cycle

26-25

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G85): Boring Cycle, No Dwell/Feed Out

26-28

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G86): Boring Cycle, Spindle Stop/Rapid Out

26-30

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G87): Back Boring Cycle

26-32

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G88): Boring Cycle, Spindle Stop/Manual Out

26-34

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(G89): Boring Cycle, Dwell/Feed Out

26-36

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26.5 Altering Milling Fixed Cycle Operating Parameters

26-38

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26.6 Examples of Drilling Cycles

26-40

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chapter 27

Skip, Gauge, and Probing Cycles

27.1 Chapter Overview

27-1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27.2 External Skip, Gauge, and Probe Functions

27-1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27.2 External Skip Functions (G31 codes)

27-2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27.3 Tool Gauging External Skip Functions (G37 codes)

27-4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27.4 Hole Probing (G38)

27-8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27.5 Parallel Probing Cycle (G38.1)

27-12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27.6 Probing Parameters Table

27-15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27.7 Adaptive Depth (G26)

27-18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Advertising