Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 724)

Paramacros
Chapter 28
28-24
#5021 to 5032
Coordinates of Commanded Position
These parameters are read-only. They correspond to the current
coordinates of the cutting tool. These are the coordinates in the work
coordinate system.
5021 Axis 1 coordinate position 5027 Axis 7 coordinate position
5022 Axis 2 coordinate position 5028 Axis 8 coordinate position
5023 Axis 3 coordinate position 5029 Axis 9 coordinate position
5024 Axis 4 coordinate position 5030 Axis 10 coordinate position
5025 Axis 5 coordinate position 5031 Axis 11 coordinate position
5026 Axis 6 coordinate position 5032 Axis 12 coordinate position
The system installer determines in AMP the name (or word) that is used to
define the axis.
#5041 to 5052
Machine Coordinate Position
These parameters are read-only. They correspond to the coordinates of the
cutting tool in the machine (absolute) coordinate system.
5041 Axis 1 coordinate position 5047 Axis 7 coordinate position
5042 Axis 2 coordinate position 5048 Axis 8 coordinate position
5043 Axis 3 coordinate position 5049 Axis 9 coordinate position
5044 Axis 4 coordinate position 5050 Axis 10 coordinate position
5045 Axis 5 coordinate position 5051 Axis 11 coordinate position
5046 Axis 6 coordinate position 5052 Axis 12 coordinate position
The system installer determines in AMP the name (or word) that is used to
define the axis.
Position data for the absolute position of an adaptive depth probe is
invalid.