Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 176)

Editing Part Programs Offline
Chapter 6
6-12
The programmer can upload a part program from the control’s memory to
the workstation using the Upload application of ODS. This allows the part
program to be edited or stored on the workstation.
1. Interface the workstation with the control (see section 6.3)
2. Return to the main menu line of ODS
3. Press
[F3]
to pull down the Application menu.
The workstation displays this screen:
F1 - File F2 - Project F3 - Application F4 - Utility F5 - Configuration
Proj: PALTEST Appl: Upload Util: Get PAL I/O
AMP
PAL
I/O Assignments
Part Program
Upload
Download (A)
(P)
(I)
(R)
(U)
(D)
4. Use the arrow keys to highlight the Upload application then press
[ENTER]
or press
[U].
5. Press
[F4]
to pull down the Utility menu.
6.5
Upload Part Programs to
ODS