Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set User Manual
Page 727
Paramacros
Chapter 28
28-27
#5090 to 5094
Probing Cycle Positions
These parameters are read-only. They correspond to values (in the
machine coordinate system) generated by the last successful probing cycle.
These cycles are programmed using G-codes G38 (circle diameter and
center measurement) and G38.1 (parallel probing cycle).
5090
G38.1 rise measurement
5091
G38.1 run measurement
5092
G38 Hole Center Coordinate Location on
First hit axis
5093
G38 Hole Center Coordinate Location on
Second and Third hit axis
5094
G38 Radius of Hole
Figure 28.1
Paramacro Parameters for G38.1 Parallel Probing
1st hit
2nd hit
Work piece or fixture
(#5090 Run distance)
(#5091 Rise Distance)
Figure 28.2
Paramacro Parameters for G38 Circle Diameter and Center Measurement
(5092 - Y center point)
(5093 - X center point)
+X
-X
+Y
4
3
2
1
5
6
+
(5094 - hole radius)