Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 230)

Displays and Graphics
Chapter 8
8-14
{DTG} (Small Display)
The distance from the current position to the command end point, of the
commanded axis in normal size characters is displayed for all system axes
in the active process (only available when more than 9 axes are AMPed in
the system, or more than 8 axes in the process for dual process systems).
Figure 8.12
Results After Pressing {DTG} (Small Display) Softkey
PRGRAM A B S TARGET D T G AXIS
SELECT
Distance to Go [ MM ]
X 0000.000
Y 0000.000
Z 0000.000
U 0000.000
V 0000.000
W 0000.000
A 0000.000
B 0000.000
C 0000.000
$X 0000.000
$Y 0000.000
$Z 0000.000
F 0.000 MMPM S 00