Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 633)

Chapter
26
26-1
Milling Fixed Cycles
This chapter covers the G-word data blocks in the milling fixed-cycle
group. The operations of the milling fixed cycles are explained in these
sections:
Information on: On page:
Milling Fixed Cycles 26-2
Positioning and Hole Machining Axes 26-4
Parameters 26-7
Milling Fixed Cycle Operations 26-8
Altering Milling Fixed Cycle Operating Parameters 26-38
Examples of Milling Cycles 26-40
For this chapter, as well as this manual, make the following assumptions:
X and Y axes are the positioning axes (G17 plane).
Z axis is the hole machining axis for drilling, boring, and tapping
applications.
26.0
Chapter Overview