Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 241)

Displays and Graphics
Chapter 8
8-25
2. Select a program. Press {SELECT PRGRAM}.
(softkey level 2)
SELECT
PRGRAM
QUICK
CHECK
STOP
CHECK
T PATH
GRAPH
T PATH
DISABL
3. Use the up and down cursors to select a program.
4. Press {ACTIVE PRGRAM} to return to level 2 and activate the
program.
Follow these steps to run graphics:
1. Press the {PRGRAM CHECK} softkey.
(softkey level 1)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
2. Select a program. Press {SELECT PRGRAM}.
(softkey level 2)
SELECT
PRGRAM
QUICK
CHECK
STOP
CHECK
T PATH
GRAPH
T PATH
DISABL
3. Use the up and down cursors to select a program.
4. Select graphics. Follow the appropriate steps:
(softkey level 2)
SELECT
PRGRAM
QUICK
CHECK
STOP
CHECK
T PATH
GRAPH
T PATH
DISABL
SELECT
PRGRAM
QUICK
CHECK
STOP
CHECK
T PATH
GRAPH
T PATH
DISABL
(softkey level 2)
Active Graphics QuickCheck Graphics
GRAPH SYNTAX
ONLY
(softkey level 3)
The graphics you select remains active until you disable graphics.
5. Press the <CYCLE START> button to plot the part program.
8.4.2
Running Graphics