Software mtb panel screen – Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set User Manual
Page 41
Basic Control Operation
Chapter 2
2-17
Software MTB Panel Screen
To use the software MTB panel feature, follow these steps:
1.
From the main menu screen, press the
{FRONT PANEL}
softkey.
(softkey level 1)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
The Software MTB Panel screen displays the current status of the
alterable features.
JOG
AXIS
PRGRAM
EXEC
SOFTWARE FRONT PANEL
MODE SELECT:
MDI
RAPID TRAVERSE:
OFF
FEEDRATE OVR:
0%
RAPID FEEDRATE OVR:
100%
SPINDLE DIRECTION:
CW
SPINDLE SPEED OVR:
50%
DRY RUN MODE:
OFF
BLOCK DELETE:
OFF
M-FUNC LOCK:
OFF
OPTIONAL STOP:
OFF
SINGLE BLOCK:
OFF
MIRROR IMAGE:
AXIS INHIBIT:
USE CURSOR FOR SELECTION
2.
Press the up or down cursor keys to select the function you want to
change. The selected function appears in reverse video.
3.
Alter the value of the function by pressing the left or right cursor keys
(except for the Mirror Image and Axis Inhibit features). When you
select the Mirror Image or Axis Inhibit features, the softkey names
change to the axis names. Press the softkey that corresponds to the
axis (or axes) that you want to assign to these features.