Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 234)

Displays and Graphics
Chapter 8
8-18
{PRGRAM DTG} (Small Display)
This screen provides a multiple display of position information from the
program screen and the distance to go screen. It displays all system axes in
the active process (only available when more than 9 axis are AMPed in the
system, or more than 8 axis in the process for dual process systems).
Figure 8.16
Program, Distance to Go Screen (Small Display)
M CODE PRGRAM
D T G
ALL
PROGRAM
X -9999.647
Y -3333.647
Z -1111.647
U -2222.647
V -2222.647
W -2222.647
A -2222.647
B -2222.647
C -2222.647
$X -2222.647
$Y -2222.647
$Z -2222.647
F 0.000 MMPM S 00
Distance to Go [ MM ]
X 0000.000
Y 0000.000
Z 0000.000
U 0000.000
V 0000.000
W 0000.000
A 0000.000
B 0000.000
C 0000.000
$X 0000.000
$Y 0000.000
$Z 0000.000