Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 857)

Softkey Tree
Appendix A
A-3
(softkey level 1)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
If you want to: Press:
Edit, activate, or copy a program from a peripheral or control memory {PRGRAM MANAGE}
Display or enter tool offset data, the work coordinate system offset data, etc. {OFFSET}
View and modify the local and global parameter assignments for paramacros {MACRO PARAM}
Check the part program, graphics, QuickCheck, and active program without
actually moving an axis {PRGRAM CHECK}
Enter and display inhibit zone limits, canned cycle parameter data,
communications, AMP, etc. {SYSTEM SUPORT}
Perform various operations that would normally be done by using an MTB
panel, cycle start, jogging, etc. {FRONT PANEL}
Display error messages, including an error log of old messages {ERROR MESAGE}
Enter or assign passwords and access levels to selected features {PASSWORD}
Change the language displayed on the screen of the control {SWITCH LANG}
Display more softkeys on the same level when there are more softkeys on
a level than can be displayed at once { • }
Display the previous level or previous row of softkeys { • }
The remainder of this appendix shows the softkey tree. This tree illustrates
the entire softkey layout on the control in an easy-to-use flow-chart type
format. This flow chart has been drawn to have no 4-way intersections (no
4 lines connected at any one point). If you see what appears to be a 4-way
intersection, it is really only a crossover point for lines that do not
intersect.
Describing Level 1 Softkeys
Using the Softkey Tree