Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 690)

Skip, Gauge, and Probing Cycles
Chapter 27
27-16
2. Press the {PROGRAM PARAM} softkey.
PTOM
SI/OEM
AMP DEVICE
SETUP
MON-
TOR
TIME
PARTS
(softkey level 2)
PRGRAM
PARAM
3. Press the {PROBE PARAM} softkey to display the probing cycle
parameter table.
ZONE
LIMITS
F1-F9 MILCYC
PARAM PARAM
(softkey level 3)
PROBE
Figure 27.6
Probing Parameters Screen
INCH/
METRIC
UPDATE
& EXIT
QUIT ADD TO
VALUE
PROBING PARAMETERS
APPROACH DISTANCE R 0.000 [ MM]
TOLERANCE BAND D 0.000 [ MM]
APPROACH FEEDRATE E 0.000 [MMPM]
PROBE FEEDRATE F 0.000 [MMPM]
PROBE LENGTH 0.000 [ MM]
PROBE RADIUS 0.000 [ MM]
REPLCE
VALUE
4. Use the up, or down cursor keys to move the block cursor to the
probing parameter to be changed. The selected parameter will be
shown in reverse video.