Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 197)

Running a Program
Chapter 7
7-15
3. Press the {MID ST PRGRAM} softkey.
(softkey level 3)
DE-ACT
PRGRAM
SEARCH MID ST
PRGRAM
T PATH
GRAPH
SEQ
STOP
TIME
PARTS
4. To search for a sequence number press the {SEQ # SEARCH}
softkey. To search for a character string press the
{STRING SEARCH} softkey.
(softkey level 4)
SEQ #
SEARCH
STRING
SEARCH
5. Key in the desired character string or sequence number to search for
and press the [TRANSMIT] key. The control locates an @ symbol to
the left of the block immediately before the block that automatic
execution begins from.
If this is not the block to begin execution from press either the:
{CONT} softkey to continue to search for the entered character
string or sequence number.
{TOP OF PRGRAM} to return to the first block in the program.
{QUIT} softkey to end either the sequence number search or the
character string search operations.
(softkey level 5)
CONT TOP OF
PRGRAM
QUIT EXIT
CAUTION: When you exit a mid-program start (search with
memory), M- and S-codes are sent to PAL. If, during normal
execution, that program activated a spindle, mid-program start
may also start it. To prevent this, your system installer can use
the $BLKSTAT flag , which indicates the control is in
mid-program start.