Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 856)

Softkey Tree
Appendix A
A-2
For example :
(softkey level 1)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
When softkey level 1 is reached, the previous set of softkeys is displayed.
Press the continue softkey {
•
} to display the remaining softkey functions
on softkey level 1.
(softkey level 1)
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
On softkey level 1, the exit softkey is not displayed since the softkeys are
already on softkey level 1.
The softkey functions for level 1 softkeys are explained in this appendix.
Softkey functions for level 2 or higher are explained in the sections that
apply to specific operations. A “tree” of softkeys listing all the softkeys
and their levels is included in the back of this appendix.
Important: Some of the softkey functions are purchased as optional
features. This manual assumes that all available optional features have
been purchased for the machine. If the feature has not been purchased,
blank keys may appear.