Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 166)

Editing Part Programs Offline
Chapter 6
6-2
Selecting the Part Program application provides access to the part program
utilities of ODS. To select the Part Program application:
1. Return to the main menu line of ODS.
2. Press
[F3]
to pull down the Application menu:
The workstation displays this screen:
F1 - File F2 - Project F3 - Application F4 - Utility F5 - Configuration
Proj: PALTEST Appl: Upload Util: Get PAL I/O
AMP
PAL
I/O Assignments
Part Program
Upload
Download (A)
(P)
(I)
(R)
(U)
(D)
3. Press [R] to select the Part Program option.
The status line of the screen displayed by the workstation shows that the
Part Program application has been selected.
The Edit Part Program utility of ODS is used to edit part programs on a
workstation. Programs that already exist on the control may be uploaded
to the workstation for editing. These programs or programs created using
ODS may be edited using the screen or text editor that is configured in
ODS. To edit part programs thorough ODS:
1. Select the Part Program Application (see section 6.1)
6.1
Selecting the Part Program
Application
6.2
Editing Part Programs Off
Line