Rockwell Automation 8520-MUM 9/Series CNC Mill Operation and Programming Manual Documentation Set - Manual (Page 852)

Using Transfer Line Cycles
Chapter 31
31-50
Template 18: Single Axis Feed Cycle
Letter Paramacro Label Description
F
1
500 MAIN RAPID FEEDRATE The velocity of the tool as it approaches the part.
X
1
501 MAIN FEED START The position of the tool as it drills into the part.
F
2
502 MAIN FEEDRATE The velocity of the tool as it drills into the part.
X
2
503 MAIN FINAL POSITION The depth of the tool at its final position in the part.
X
3
504 MAIN RETURN POSITION The position of the tool when it started the cycle.
X 505 MAIN TOOL CHANGE
POSITION The position the tool moves to so that a tool change may be performed.
I 506 HARD STOP SENSE ZONE The position that indicates to the control that a hard stop is on the axis.
Required entry Optional entry
Figure 31.21
Single Axis Feed Cycle
F1
F2
X3
X1
I
X2
F1
MAIN SLIDE VELOCITY Cutting feedrates
Rapid feedrates